化工儀器網
資料下載
測量應用案例-20211001
閱讀：130 發布時間：2021-11-16| 提 供 商 | 美國布魯克海文儀器公司 | 資料大小 | 4MB |
|---|---|---|---|
| 資料圖片 | 下載次數 | 0次 | |
| 資料類型 | PDF 文件 | 瀏覽次數 | 130次 |
| 免費下載 | 點擊下載 |
文獻名：Removal of Cd (II) from Aqueous Solutions by Aluminium Hydroxide-Modified Attapulgite
作者： Qinhu Zhang, Liqun Cai
College of Resources and Environment, Gansu Agricultural University, Lanzhou, China
摘要：Modified attapulgite (ATP-Al) was prepared with aluminium hydroxide through a co-precipitation method, and we used ATP-Al as an adsorbent to investigate the adsorption of Cd(II) from aqueous solutions. Raw ATP and ATP-Al were characterized by TEM, FTIR, XRD and Zeta. Adsorption parameters, such as pH, initial Cd(II) concentration, contact time and adsorbent dose, were evaluated to explain the mechanism of Cd(II) adsorption on ATP-Al. ATP-Al had a better adsorption capacity of Cd(II) than ATP. When the pH value was 7, ATP and ATP-Al had the highest Cd(II) adsorption capacities. The optimal dose of adsorbent was 0.1 g per 25 mL of solution. The Freundlich model better described the adsorption isotherm on ATP and ATP-Al than the Langmuir model. The maximum adsorption capacity for Cd(II) calculated was 4.01 and 6.36 mg g-1, respectively. Adsorption of Cd(II) onto ATP and ATP-Al followed pseudo-second order kinetics. The Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were evaluated by a thermodynamic study. The adsorption processes of ATP and ATP-Al were exothermic, spontaneous and mainly based on physical adsorption.
關鍵詞：attapulgite, aluminium hydroxide, Cd(II), adsorption