您好, 歡迎來到化工儀器網
YTT-150系列差動遠傳壓力表主要技術參數
精確度：1.6級
輸出信號：4～20mA DC或0～10mA AC，二線制或四線制
負載電阻：250Ω～350Ω
供電電源：直流24V
工作環境：
（1）溫度：-10～+55℃
（2）相對濕度：≤85%
（3）外磁場：≤5奧斯特
產品簡介
詳細介紹
YTT-150系列差動遠傳壓力表
YTT-150 Series Differential Motion Remote Transmitting Pressure Meter
YTT-150系列差動遠傳壓力表簡介
用于測量對銅及其合金不起腐蝕作用的液體、氣體和蒸汽的壓力。儀表帶上阻尼器后，可測量脈動、沖擊、突然卸荷介質的壓力。帶上隔膜部分后，可測量粘度大、有腐蝕性介質的壓力。本儀表除就地進行壓力指示外，還連續輸出與被測壓力信號成線性的4～20mA或0-10mA直流信號。可以與分別DDZ-Ⅲ電動單元組合儀表中的顯示、記錄、調節儀表聯用，組成自動記錄、調節、控制等系統。適用于石油化工、冶金、電站、輕工業等部門使用。
YTT-150 series differential motion remote transmitting pressure meter is used for measuring pressures of liquids, gases, or vapors that do not corrode copper and its alloys. If equipped with shock damper, this meter mayalso measure
Pressures caused by pulsation, concussion, and sudden unloaded mediums. If equipped with diaphragm, it may also be used to measure pressures of such mediums with big viscosity and causticity.This instrument provides not only local pressures with indication, but also continual output of 4～20mA direct current signal with linear relationship with its testee pressure signal. It may compose automatic recording, adjustment, control, or other systems, in combination with displaying, recording, and adjusting instruments of DDZ-II electricity-powered units, applicable for applications in such departments as petroleum chemical industry, metallurgy, or light industry.
主要技術參數
- 精確度：1.6級
- 輸出信號：4～20mA DC或0～10mA AC，二線制或四線制
- 負載電阻：250Ω～350Ω
- 供電電源：直流24V
- 工作環境：
（1）溫度：-10～+55℃
（2）相對濕度：≤85%
（3）外磁場：≤5奧斯特 - Accuracy: : grade 1.6
- Output signal: 4～20mA DC,0～10mA AC
two or four wire system - Resistance value of load: 250Ω～350Ω
- Power supply: 24V DC
- Working environment:
（1） Temperature: -10～+55℃
（2） Relative humidity: ≤85%
（3） External magnetic field: ≤5oresteds
標記示例：YZTT-150B 產品電腦編碼為 091206301
差動遠傳壓力真空表，輸出信號為4～20mA DC。產品電腦編碼詳見
《差動遠傳壓力系列儀表選型指南》。
Mark example: the product computer code for YZTT-150B is 091206301.
For differential motion remote transmitting pressure vacuum meter, the output signal is 4～20mA DC. for further information on computer code, please see the “Guide for type selection of differential motion remote
transmittingseries instruments and meters”
型號規格 Types and specifications
外形尺寸 External dimension
接口尺寸包括：M20×1.5；G1/2；1/2NPT
Joint dimension includes: M20x1.5, G1/2, and 1/2NPT.
儀表選型指南
訂貨須知 Ordering instructions
訂貨時須注明：產品電腦編碼、型號、名稱、精確度、測量范圍。如特殊要求，請注明技術要求。
Ordering instructions: The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.