您好, 歡迎來到化工儀器網
WSS系列雙金屬溫度計產品特點
該溫度計采用進口美國的雙金屬片作為測溫原件，測量速度快、精度高。
SUS304不銹鋼等離子焊外殼，旋壓密封工藝，具有較強的抗震、防濺和防腐性能，并且無汞害、易讀數、堅固耐用。
儀表底殼設有*的外部調零裝置，可以方便的進行現場的再校準。
產品簡介
詳細介紹
WSS系列雙金屬溫度計
WSS Series Double-metal thermometer
WSS系列雙金屬溫度計簡介
是一種測量中低溫度的現場檢測儀表，可以直接測量各種生產過程中的-80℃～+500℃范圍內的液體、蒸汽和氣體等介質的溫度。
Brief introduction:
WSS Series double metal thermometer is a sort of witnessed inspecting meter suitable for measuring moderate and low temperature, which can be used to directly measure temperatures of various mediums existing in producing process, such as various liquid, steam and gas, whose temperature are in the range of -80℃～+500℃
產品特點
- 該溫度計采用進口美國的雙金屬片作為測溫原件，測量速度快、精度高。
- SUS304不銹鋼等離子焊外殼，旋壓密封工藝，具有較強的抗震、防濺和防腐性能，并且無汞害、易讀數、堅固耐用。
- 儀表底殼設有*的外部調零裝置，可以方便的進行現場的再校準。
Characteristic:
- This sort of thermometer chooses double metal sheet imported from USA as temperature measuring component, whose measuring speed is fast and precision is high.
- Crust of the thermometer is made of SUS304 stainless by plasma welding, and spinning sealing techniques are adopted. The thermometer possesses better performance in shock proof, anti-splash and antisepsis. Besides, it does not cause mercury effects and is readable, solid and durable.
- Exterior zero adjusting screw is particularly fitted at the bottom of the thermometer, so readjustment can be easily done on spot.
主要技術參數
- 公稱直徑（mm）：60、100、150
- 精確度：1.0，1.5
- 熱響應時間：≤40S
- 防護等級：IP55
- 角度調整誤差：角度調整誤差不超過其量程的1.0%
- 回差：溫度計回差應不大于基本誤差限的值
- 重復性：溫度計重復性極限范圍應不大于基本誤差
- 限值的的1/2
Principal technical parameters
- Nominal diameter of meter face（mm）: 60, 100, 150
- Accuracy: 1.0，1.5
- Thermal response time: ≤40S
- Defend Grade: Ip55
- Angle Adjusting Error: Angle-adjusting error is no more than 1.0% of its measure range
- Hystersis: hystersis of thermometer should be no more than absolute value of basic error limit.
- Repeatability: limit range of thermometer repeatability should be no more than half of basic error limit.
型號表示 Model designations
正常工作大氣條件 Normal working atmospheric conditions
標度范圍 Measuring ranges
測量端形式 Gagepin form
型號規格 Types and specifications
安裝固定形式 installing form
型號規格
訂貨須知 Ordering instructions
訂貨時須注明：產品電腦編碼、型號、名稱、精確度、測量范圍。如特殊要求，請注明技術要求。
Ordering instructions: The product computer code ,types, names, accuracy grades, and measuring ranges .must be clearly noted. In case of special requirements, technical requirements shall be clearly noted specifications on the back of the order on ordering goods.