您好, 歡迎來到化工儀器網
ASTM D904測試標準
本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM D904標準詳細信息或ASTM D904具體測試方法，歡迎與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM D904標準介紹
ASTM D904規定了膠接接頭(至少有一個玻璃或透明粘接)紫外線(UV)光老化(有水循環或無水循環)的基本原則和操作程序，使用熒光紫外線(見方法A)或氙弧光源(見方法B)。現行標準為版本為2013年復審的ASTM D904 - 99（2013）。
1. Scope
1.1 This practice covers the basic principles and operating procedures for ultraviolet (UV) light aging (with or without water) of adhesive bonded joints having at least one glass or transparent adherend, using fluorescent UV (see Method A) or xenon-arc light sources (see Method B).
1.2 This practice is limited to the apparatus for obtaining, measuring, and controlling the aging conditions, and to the procedures for exposure. Sample preparation, strength, test conditions, and evaluation of the results are described in other ASTM test methods or specifications.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
D907 Terminology of Adhesives
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
▼ASTM D904第三方檢測機構
以上標準信息來自互聯網搜索整理，如需了解完整的ASTM D904的信息或ASTM D904標準解讀，歡迎詳詢。