QQ交談
您所在位置：請輸入產品關鍵字：
郵編：201824
聯系人：張琳琳
電話：
傳真：
手機：13482229885
留言：發送留言
個性化：www.junengjx.com
網址：www.junengjx.com
商鋪：http://www.fzbnjj.com/st166825/
SaniForce 1590 HS 衛生泵的應用
點擊次數：1087 發布時間：2017-1-5
SaniForce 1590 HS 衛生泵的應用
GRACO 1590 HS衛生泵1.5 英寸氣動雙隔膜泵具有 32 Ra 的表面處理，zui大流量達 90 加侖/分鐘（341 升/分鐘）
固瑞克衛生泵采用快拆設計，操作方便，可在五分鐘內完成拆卸。可選球閥或瓣閥兩種止回閥設計，配有有 1.5 英寸、2 英寸、3 英寸和 4 英寸的卡箍連接。
功能:
zui大流量達 90 加侖/分鐘（341 升/分鐘）
泵體可360度旋轉便于排出殘留物料
易于清洗、快拆式、可旋轉設計
配備固瑞克免潤滑、無死點運行的空氣閥
應用于從各種容器中輸送流體至分裝線，物料粘度zui高可達15000厘泊
適用的物料包括水果夾心料、意大利面沙司、松餅或蛋糕面粉糊、食用油和沐浴露
獲得的免潤滑空氣閥
移動部件少
三向導向閥保證運行無死點
無需拆泵可直接在外部快速進行維修，維護成本低
氣閥設計去除了 O 形圈和柱形閥，杜絕了競爭對手氣閥常見的故障
PTFE/EPDM 一體式膜片
固瑞克 PTFE/EPDM 一體式膜片對 PTFE 流體端和 EPDM 空氣端采用一次性整體鑄膜，不留任何讓細菌滋生的空隙。
流體端隔膜板不會暴露在外，從而減少膜片磨損，延長膜片壽命
在磨損性應用中膜片的使用壽命更長
SaniForce 515、1040、1590、2150 和 SaniForce 1590 HS、3150 HS 可選配
規格：
| SaniForce 1590 HS and 1590 3A Diaphragm Pumps | |
| Maximum fluid working pressure | 8 bar, 0.8 MPa |
| Air pressure operating range | 1.4–8 bar, 0.14–0.8 MPa |
| Maximum air consumption | 3.5 m³/minute |
| Air consumption at 70 psi, 60 gpm | 1.4 m³/minute |
| Maximum free-flow delivery | 378 lpm |
| Maximum pump speed | 200 cpm |
| Gallons/liters per cycle* | 2.0 l |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) | 8.5 m wet, 4.6 m dry |
| Maximum size pumpable solids | 15.9 mm |
| Air inlet size | 0.5 in npt(f) |
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 90 dB(A) |
| Sound power level | 103 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 85dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings | |
| PTFE | 104°C |
| Santoprene® | 82°C |
| 3A Approved EPDM | 135°C |
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. | |
| Wetted materials on all models | 316 stainless steel, 3A Approved EPDM, PTFE |
| Wetted materials depending on model | 3A Approved EPDM, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, polyester (labels), LDPE foam (gasket) |
| Weight | |
| All Models | 44 kg |
| Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements. | |