QQ交談
您所在位置：請輸入產品關鍵字：
郵編：201824
聯系人：張琳琳
電話：
傳真：
手機：13482229885
留言：發送留言
個性化：www.junengjx.com
網址：www.junengjx.com
商鋪：http://www.fzbnjj.com/st166825/
固瑞克HUSKY1050泵
點擊次數：1236 發布時間：2017-1-5
固瑞克HUSKY1050泵
Husky 1050 氣動雙隔膜泵 1 英寸氣動雙隔膜泵
1 英寸（25.4 毫米）過流尺寸，可選鋁合金、聚丙烯、導電聚丙烯、聚偏氟乙烯（PVDF）、不銹鋼和哈氏合金材質。
Husky 1050 氣動雙隔膜泵配備固瑞克新款無死點、低脈動的空氣閥，確保泵運行流暢、膜片換向迅速。過流部分可選鋁合金、聚丙烯、導電聚丙烯、聚偏氟乙烯（PVDF）、不銹鋼和哈氏合金材質。
Husky 1050功能：
與市場同類產品相比，效率提高 30%
與 Husky 1040 相比，流量增加 20%
與其他同類產品相比，一體式膜片使用壽命zui高可延長 5 倍
提供多種材質的產品適用于各種應用場合
Husky 1050規格：
| Husky 1050 Air-Operated Diaphragm Pump | |
| Maximum fluid working pressure | 8.6 bar, 0.86 MPa |
| Air pressure operating range | 1.4-8.6 bar, 0.14-0.86 MPa |
| Fluid displacement per cycle | 0.64 l |
| Air consumption | 0.7 m³/min at 4.8 bar, 0.48 MPa, 76 lpm |
| Maximum values with water as media under submerged inlet conditions at ambient temperature: | |
| Maximum air consumption | 1.9 m³/min |
| Maximum free-flow delivery | 189 lpm |
| Maximum pump speed | 280 cpm |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) | 4.9 m dry, 8.8 m wet |
| Maximum size pumpable solids | 3.2 mm |
| Recommended cycle rate for continuous use | 93 - 140 cpm |
| Recommended cycle rate for circulation systems | 20 cpm |
| Sound Power* | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm | 78 dBa |
| at 100 psi (7.0 bar, 0.7 MPa) and full flow | 90 dBa |
| Sound Pressure** | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm | 84 dBa |
| at 100 psi (7.0 bar, 0.7 MPa) and full flow | 96 dBa |
| Fluid temperature range | See Manual |
| Air inlet size | 1/2 npt(f) |
| Fluid inlet size | |
| Aluminum (1050A), Hasloy (1050H) or Stainless Steel (1050S) | 1 in npt(f) or 1 in bspt |
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) | 1 in raised face ANSI/DIN flange |
| Fluid outlet size | |
| Aluminum (1050A), Hasloy (1050H) or Stainless Steel (1050S) | 1 in npt(f) or 1 in bspt |
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) | 1 in raised face ANSI/DIN flange |
| Weight | |
| Aluminum (1050A) | 10.5 kg |
| Conductive Polypropylene (1050C) and Polypropylene (1050P) | 8.2 kg |
| Hasloy (1050H) | 18.6 kg |
| PVDF (1050F) | 11.8 kg |
| Stainless Steel (1050S) with conductive polypropylene center | 16.5 kg |
| Stainless Steel (1050S) with polypropylene center | 16.9 kg |
| Stainless Steel (1050S) with aluminum center | 18.8 kg |
| Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction | |
| 1050A | Aluminum |
| 1050H | Hasloy |
| 1050C and 1050P | Polypropylene |
| 1050F | PVDF |
| 1050S | Stainless Steel |
| Non-wetted external parts | |
| Aluminum (1050A) | aluminum, coated carbon steel |
| Hasloy (1050H) | hasloy, stainless steel, polypropylene or aluminum (if used in center section) |
| Plastic (1050P, 1050C, and 1050F) | stainless steel, polypropylene |
| Stainless Steel (1050S) | stainless steel, polypropylene or aluminum (if used in center section) |
| Reference Information | |
| Maximum Storage Time (varies with conditions) | 2 years |
| Maximum Lifetime (varies with operating conditions and maintenance) | 10 years |
| Power Efficiency Factor (varies based on pump configuration, operating parameters, and material) | 1.61 l air consumed/1 l fluid pumped at 4.8 bar |
| * Sound power measured per ISO-9614–2. ** Sound pressure was tested 3.28 ft (1 m) from equipment. All trademarks mentioned in this manual are the property of their respective owners. | |